Pressure transducers for mobile hydraulic applications

brief description

The pressure transducers of the SMO series are specially designed and developed for mobile applications and offroad vehicles. Development of EMI and environmental robustness are made for the SMO trasnducers and thus can be called the "big brother" of our SML series products.

Dedicated EMI capabilities/specifications have to be met for special mobile applications. The SMO transducers are able to be fitted with a "load dump" module. This module provides protection to load dump pules according to ISO 7637.

In addition snubbers can be attached to the SMO transducers. These snubbers are intended to reduce pressure spikes in hydraulic applications. Snubbers are available with opening diameters of 0.6mm (0,0236 inch) or 0.3mm (0,0118 inch). The pressure port and the sensing element are made of stainless steel and fully electrobeam welded in a special process.

product characteristics

  • fully welded construction
  • high chemical / media compatibility by the use of stainless steel
  • high rate of pressure cycle widthstand

technical data

pressure range:
up to 4000 bar / 58.000 PSI
max over pressure: 2 times nominal pressure 
min burst pressure: 3 times nominal pressure
output signals: 4-20 mA, 0-10 V, 0.5-4.5 V ratiometric
CANopen (SMC), J1939
response time [10-90%]:
≤1 ms
accuracy: 0.5% F.S.
working temperature range (media): -40 ... 125°C / -40 ... 257°F
working temperature range (ambient): -40 ... 105°C / -40 ... 221°F
material of parts in contact with media:
stainless steel 1.4301 / 1.4305 / 1.4542
material of housing: stainless steel 1.4301
shock resistance (according IEC 68-2-32): 1000g
IP class (according IEC 60529): up to IP69K (depending on electrical connection & mating)
weight: 80 - 120 g
minimum pressure cycles: 1*106
   
( for al parameters the specific datasheet applies )
( for detailed information on technical data see the specific datasheet )